Sintered bronze keel cooler with thread fixing max hull 40mm + 2 zinc anodes

£444.96 (inc VAT)

Frigoboat , Sintered bronze keel cooler with thread fixing max hull 40mm + 2 zinc anodes ,

Suitable to a maximum volume fridge: 400

Or maximum volume freezer: 120

Part Number: 1E50361Z
Dimensions: 70mm (h) x 187mm (w) x 23mm (d)

Description

The Frigomatic keel cooler is undoubtedly the most efficient condensing unit for marine refrigeration currently available. For details on fitting and installation go to Fitting a keelcoled 12 volt fridge system

Suitable for hull thicknesses up to 40mm thick. Must be fitted within 1.5m from the compressor below the waterline. Use with either a K35F or K50F keel cooled compressor, or can be retrofitted to any Frigoboat air cooled compressor condensing set (with R134a refrigerant)

Key Features:

  • Highly corrosion resistant cupronickle pipe heat exchanger
  • Protected from damage by a profiled sintered bronze casting
  • Sintered bronze is porous so the water passes through to the cupronickle heat exchanger inside
  • Supplied with sacrificial zinc anodes for galvanic protection, but must be correctly bonded
  • Can be fitted as an upgrade to any Frigoboat or Frigomatic air cooled compressor and condensing set

Key Checks Before Purchase

  • Check refrigerant is R134a

Technical Information

Weight 2.3 kg
Dimensions 70mm (h) x 187mm (w) x 23mm (d)
Brand

Frigoboat

Max Volume Fridge

400

Max Volume Freezer

120

Refrigerant

r134a

Maximum hull thickness

40mm

Pipe Length (m)

1.5

The following file(s) are available to download:

The following file(s) are available to download:

The following file(s) are available to download:

You may also like…